TOUCH diamond Flame nail drill bit rounded tip red 021
5,50 €
Diamond bit Touch “Safe Flame” — a professional attachment for hardware and combined manicure/pedicure, designed for precise, delicate, and controlled work in the cuticle area, side walls, and sinuses.
Thanks to its flame shape, the bit allows you to gently lift the cuticle, clean the pterygium, work on lateral sinuses and side walls, and perform delicate polishing of the periungual area without excessive pressure on the nail plate.
High-quality diamond coating ensures even processing, stable performance, and helps achieve a clean, neat result even in hard-to-reach areas.
Diameter
021 / 2.1 mm
10 in stock
Related products
Carbide Bit “Safe” Crystal Professional №21 (no abrasiveness, 1.3 mm)
Carbide Bit “Safe” Crystal Professional №21 (no abrasiveness, 1.3 mm)
Specifications:
• Type: safe (no traditional abrasiveness)
• Shape: narrow cylinder
• Tip diameter: 1.3 mm
• Working part length: 5 mm
• Shank length: 38 mm
• Working surface: 6 cutting edges
• Service life much longer than diamond bits
• Does not rust during sterilization
Diamond Bit “Ball” Crystal Professional №05 (Red Cut 3.5 mm)
Diamond Bit “Ball” Crystal Professional №05
The Diamond Bit “Ball” Crystal Professional is a precision tool designed for electric manicure and pedicure.
Perfect for cleaning and refining cuticles, working around nail folds, drilling cracks in gel or acrylic during correction, and creating recesses for rhinestones.
It is also suitable for treating calluses, cracks, and hardened skin, ensuring accuracy and safety during the procedure.
Features
• Cut: red (fine)
• Shape: ball
• Head diameter: 3.5 mm
• Head height: 3 mm
• Shank length: 40 mm
• Grit: fine
• Even diamond coating
• Rust-resistant during sterilization
• High precision and control
Diamond Bit “Flame” Crystal Professional №06 (Blue Cut 1.8 mm)
Diamond Bit “Flame” Crystal Professional №06
The Diamond Bit “Flame” Crystal Professional is a precision tool for electric manicure and pedicure.
Its flame-shaped head allows accurate work on nail folds, removal of pterygium, lifting and cleaning of cuticles.
It can also be used to mattify the nail plate before extension and to treat calluses or cracked skin.
The even diamond coating ensures durability, smooth operation, and comfort during use.
Features
• Cut: blue (medium grit)
• Shape: flame
• Tip diameter: 1.8 mm
• Working part length: 8.0 mm
• Shank length: 35 mm
• Grit: medium
• Even diamond coating
• Rust-resistant during sterilization
• High wear resistance
STALEKS EXPERT Carbide nail drill bit cone blue, head diameter 2,3 mm, working part 14 mm
- Carbide nozzle for hardware manicure/pedicure.
- Red notch of soft hardness.
- "Cone" shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads in manicure.
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds in pedicure/podology.
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
STALEKS EXPERT Carbide nail drill bit corn red, head diameter 5 mm, working part 13 mm
- Carbide nozzle for hardware manicure/pedicure.
- Red notch of soft hardness.
- Shape "corn" for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client in manicure.
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust in pedicure/podology.
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
STALEKS EXPERT Carbide nail drill bit for left-handed users cone red, head diameter 6 mm, working part 14 mm
- Carbide nozzle for hardware manicure/pedicure.
- Red notch of soft hardness.
- "cone" shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads.
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
STALEKS EXPERT Carbide nail drill bit frustum blue, head diameter 6 mm, working part 14 mm
- Carbide nozzle for hardware manicure/pedicure.
- Yellow notch of very soft hardness.
- A "frustum" shape is for the correction of an artificial nail, removal of artificial material, processing of the skin of the feet and toe pads in manicure.
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds. in pedicure/podology.
- Processing of cornification and calluses.
- High-quality metal - can be subject to all types of sterilization and disinfection - corrosion resistant.
STALEKS EXPERT Diamond nail drill bit pointed flame blue, head diameter 2,1 mm, working part 8 mm
- Diamond nozzle for hardware manicure/pedicure.
- Blue notch of medium abrasiveness for delicate processing of skin, suitable for work by beginners and experienced technicians.
- Shape "Sharp flame" is for processing cuticles, lateral nail folds, and filing out detachments without the risk of injuring the skin.
- Lifting and removing cuticles.
- Processing of lateral nail folds.
- Processing of periungual sinuses.
- Removal of gel polish and acrylic.
- Jewelry removal
- Treatment of cracks, calluses.
- High-quality diamond coating.
- Can be subject to all types of sterilization and disinfection.
- Resistant to corrosion.
Reviews
There are no reviews yet.