STALEKS EXPERT Diamond nail drill bit ball red, head diameter 3,5 mm
6,50 €
- Diamond nozzle for hardware manicure/pedicure.
- Red notch with soft abrasiveness 180 grit suitable for working with skin or natural nails.
- The shape of the “Ball” of small diameter effectively cleans the pterygium, and the medium diameter – removes the cuticle.
In manicure:
- Lifting and removing cuticles.
- Processing of lateral nail folds and hangnails.
- Nail modeling, including nail plate piercing.
- Formation of a plate of classical shape.
In pedicure/podology:
- Treatment of cracks, calluses.
- Treatment of keratinized skin areas.
- Treatment of corn.
- Treatment of rough skin folds between the fingers.
- High-quality diamond coating.
- Can be subject to all types of sterilization and disinfection.
- Resistant to corrosion.
10 in stock
Related products
Carbide Bit “Safe” Crystal Professional №21 (no abrasiveness, 1.3 mm)
Carbide Bit “Safe” Crystal Professional №21 (no abrasiveness, 1.3 mm)
Specifications:
• Type: safe (no traditional abrasiveness)
• Shape: narrow cylinder
• Tip diameter: 1.3 mm
• Working part length: 5 mm
• Shank length: 38 mm
• Working surface: 6 cutting edges
• Service life much longer than diamond bits
• Does not rust during sterilization
STALEKS EXPERT Carbide nail drill bit cone red, head diameter 6 mm, working part 14 mm
- Carbide nozzle for hardware manicure/pedicure.
- Red notch of soft hardness.
- "Cone" shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads in manicure.
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds in pedicure/podology.
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
STALEKS EXPERT Carbide nail drill bit corn blue, head diameter 5 mm, working part 13 mm
- Carbide nozzle for hardware manicure/pedicure.
- Red notch of soft hardness.
- Shape "corn" for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client in manicure.
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust in pedicure/podology.
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
STALEKS EXPERT Carbide nail drill bit for left-handed users cone red, head diameter 6 mm, working part 14 mm
- Carbide nozzle for hardware manicure/pedicure.
- Red notch of soft hardness.
- "cone" shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads.
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
STALEKS EXPERT Carbide nail drill bit frustum green, head diameter 6 mm, working part 14 mm
- Carbide nozzle for hardware manicure/pedicure.
- Yellow notch of very soft hardness.
- A "frustum" shape is for the correction of an artificial nail, removal of artificial material, processing of the skin of the feet and toe pads in manicure.
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds. in pedicure/podology.
- Processing of cornification and calluses.
- High-quality metal - can be subject to all types of sterilization and disinfection - corrosion resistant.
STALEKS EXPERT Diamond nail drill bit flame red, head diameter 2,3 mm, working part 10 mm
- Diamond nozzle for hardware manicure/pedicure.
- Red notch with soft abrasiveness is for delicate processing of skin, suitable for work by beginners and experienced technicians.
- "Flame" shape is for processing cuticles, lateral nail folds, and filing out detachments without the risk of injuring the skin.
- The sinuses are processed with a "nose," the cuticle is cleaned with a flat part, and the lateral nail folds are processed with a "belly." Work with this drill bit at an angle of 45 degrees.
- Lifting and removing cuticles.
- Processing of lateral nail folds.
- Removal of the pterygium.
- Opening of the sinuses.
- Nail modeling.
- Processing of periungual sinuses.
- The shaping of a plate of classical shape.
- Drilling seats for rhinestones.
- Processing of corn.
- Removal of cracks.
- High-quality diamond coating.
- Can be subject to all types of sterilization and disinfection.
- Resistant to corrosion.
STALEKS EXPERT Diamond nail drill bit pointed pear blue, head diameter 4 mm, working part 12 mm
- Diamond nozzle for hardware manicure/pedicure.
- Blue notch of medium abrasiveness for delicate processing of skin, suitable for beginners and experienced technicians.
- The “sharp pear” shape is intended for processing the cuticle and lateral nail folds, as well as for cleansing the nail plate from the epidermis.
- Combines the function of a ball and a sharp flame.
- High-quality diamond coating.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
- Lifting and removing cuticles.
- Processing of lateral nail folds.
- Removal of the pterygium.
- Opening of sinuses.
- Processing of periungual sinuses.
- Polishing the nail plate.
- Opening and polishing cracks.
- Processing and removal of calluses.
Reviews
There are no reviews yet.